Well, I do not want to get any lager size tires unless I can atleast lift it 2 inches, that doesnt sound a lot, but i'm not sure if I can go 3 or 4 with the limited amount of money I have. I figure rims that stick out an inch further should keep it off the sway bars, but I don't know if it will cause rubbing problems elsewhere. I'm new to this site and rangers in general just got my first one last Friday! The body mount bolts are very hard to loosen. Thank you in advance for you help! The truck has the 3. You actually have a good rearend and good gearing for larger tires. Some minor trimming would still be required. Alignment is maintained using radius arm drop brackets, and sway bar drop brackets.
Trans Dapt 1028 is the one I have on the Van tow rig. I checked and I have an open 8. The Bearings on the explorer Dana 35 front are really close together. Have an assortment of 4x4 blocks of wood on hand or several 2x4's nailed together I used the 2x4s. He did say he was a poor college student. Here goes, I am looking to put 31inch tires on my 05 Edge. Basically, I moved my Evap Canister and put it on the core support.
Moving the tires out via spacers or changing the rim offset will just add to the stress. I'm praying the tranny isn't going out on me. I just flushed it about 6 months ago and used Castrol Mercon 5 in it. Since he has 15's I am going to assume 4x4, so a 31 would be limit. Expo, I'll address your question about a lift.
To view links or images in signatures your post count must be 10 or greater. I'm going to go with the 26s. Anyone with moderate mechanical abilities and a decent assortment of hand tools can do it in an easy weekend in their garage. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Thank you in advance for you help! I have looked into that cheap duralast filter and I saw the screen I thought the same thing, not much of a filter. They come in narrower widths. Minor trimming would still be required but a lift isn't needed.
In the fuse panel on the drivers end of the dash the fuse panel cover is visible. But if the rims are different then the tires would b … e different too. They fit nice, but will touch the sway bar at full lock. The 265 tires are about 31. Since he has 15's I am going to assume 4x4, so a 31 would be limit. You currently have 0 posts.
I would love to get a 2 inch lift or higher, but i'm a poor student since im still in school, and im living off my parents for now. I only work about 10-15 minutes away. Thanks for the info 8 Richard 1996 ford ranger ext, chevy 5. Thank step dad for his time and concern, then go buy your new tires. Many jeeps packages came with extra suspension and clearance and you should, in the future when asking a question like this, provide more info as to year and model.
You have a 16X7 rim. Ran like that for a few years. Use the search engine to search for a torsion twist for the front and warrior 153 shackles. This box will disappear once registered! I checked and I have an open 8. They fit nice, but will touch the sway bar at full lock.
There are many many many people running 31 on Rangers. I'm sorry to say your stepdads opinion is very wrong. Here goes, I am looking to put 31inch tires on my 05 Edge. I drove my '97 around for a year with that size before I lifted it up. Included for the front end is new front coil springs, radius arm drop brackets, , axle pivot brackets with camber adjustment bolts, -2. I was actually thinking of installing a triple plate cooler.